Art Tube Preamp
Posted in Posters on 10/03/2010 11:03 pm by admin
How I can get this microphone?
I have the Audio-Technica http://pro-audio.musiciansfriend.com/product/Audio-Technica-AT2035-Large-Diaphragm-Cardioid-Condenser-Microphone?sku=276789 microphone preamp that has phantom power and I http://pro-audio.musiciansfriend.com/product/ART-Tube-MP-Professional-Mic-PreampProcessor?sku=484020 as XLR to 1 / 4 "jack adapter. Just plug the adapter into the microphone. Perform regular 1 / 4" cable input microphone preamplifier, then regular 1 / 4 "cable into the preamp output of one watt Randall 20. I tried all that pressing the button and still nothing. What I get it to work? Is it just a microphone recording?
I just bought the microphone exactly the same on sale last month. The CSI has phantom power to operate. If you read the manual of your preamp, you will see that phantom power is only available on the XLR input jack. http://www.artproaudio.com/downloads/manuals/omtubemp.pdf of 1 / 4 "TS input is a simple plug … and can not conduct electricity. The way to do their academic work is to use a standard XLR microphone cable and make sure the phantom power switch is on. The cable adapter and guitar are what keeps your microphone to work. → → microphone → preamplifier XLR cable 1 / 4 "guitar cable Randall TS → And yes, it is mostly a studio microphone. * * Can be used directly, but because of its sensitivity, they are at increased risk of reactions of a normal dynamic microphone. If you plan to use a microphone to the stage you would be better with a Security SM-58 for singing or SM 57, micing instruments. The adapter works perfectly with these microphones.
Daily Tip (Wed) – ART Tube MP Studio Mic Preamp
|
|
Musical Fidelity V-CAN Headphone Amplifier $199.00 The V-CAN is a genuine state-of-the-art headphone amplifier. Most high quality headphones have impedance of around 30 Ohms. Almost all headphone amps have an output impedance between 50 and 100 Ohms. Because of their high output impedance they cannot drive headphones properly. Any sound they produce through the headphones is necessarily coloured, with distortion and non linear frequency response. … |
|
|
ART Tube MP Studio Mic Preamp $29.99 The original Tube MP made pro-caliber tube preamping available to ordinary musicians and home studios. The MP Studio goes a step further by adding a VU meter for better level control and ART’s OPL (Output Protection Limiter), which controls and maintains the output peak signal to protect hard-disk recording systems and soundcards. The VU meter reflects the impact of the OPL circuitry when it is ac… |
|
|
ART DJPRE II Phono Preamplifier Dual RCA Type Inputs and Outputs Switchable Low Cut Filter $49.00 The DJ PRE II is a high quality Phono preamp designed for your home and studio. It acts as an interface between your turntable and your audio recording system. The analog input capacitance can be switched between 100pf and 200pf to optimize your phono cartridge response. A switchable low cut filter removes turntable rumble while leaving the audio pristine. The front gain trim control and signal/cl… |
|
|
TCC TC-750 BLACK Audiophile Phono Preamp, Pre-amp (Preamplifier) $43.50 Now available in either BLACK or SILVER FINISH…This product features better sound and performance than the phono preamps built into most component stereo receivers and amps! Compare the TC-750′s specs to those of pricier brands like NAD and Cambridge Audio; ours are as good or better. Computer-designed PCB layout and 1% tolerance resistors resulting in extremely accurate RIAA equalization (coupl… |
|
|
Designing Tube Preamps for Guitar and Bass $36.00 Designing Tube Preamps for Guitar and Bass is the world’s first comprehensive guide to the design of tube-based preamplifiers, specifically for musical instrument use, in a single volume. From the input to the phase inverter, this book discusses the inner workings of every part of a conventional guitar preamp, including the use of triodes, pentodes, tone controls, effects loops and much more. Elim… |
|
|
Designing Power Supplies for Tube Amplifiers $32.81 Designing Power Supplies for Valve Amplifiers is a unique guide to the operation and practical design of linear power supplies, especially for valve equipment. Audiophiles, guitarists and general hobbyists alike will find this book an invaluable source of detailed information on transformers, rectifiers, smoothing, high-voltage series and shunt regulators, and much more. Although this book is not … |
|
|
Ultimate Tone, Volume I (Modifying and Custom Building Tube Guitar Amps, Volume I) $70.30 This is the book that jump-started the boutique tube guitar amp business. Learn the truth about tube preamp design and modification; see how tube power amps work and can be made more reliable; see how reverbs and effects loops work and better ways to configure them; learn why some amp brands are easier to service and to mod than others; see how simple switching circuits are but how capable they ca… |